Chimney brush size was common methods of heating in cold climates for centuries. Because they generate intense heat, wood stoves can be a fire hazard if not installed. The exact method of installation depends on the type of stove and if you install the chimney through the roof or through a wall. In some communities, you need a building permit to install a wood stove.
Chimney brush size with setting the core. A cure is non-combustible floor to cover the whole floor under the stove and extend at least 12 inches behind the stove and at least 18 inches in front. How far your stove should be placed from combustible walls depends on the type of stove. Set the chimney brush size on the hearth and check distances. Use a plumb line to the middle of the chimney lining, of putting the chimney through the roof. If putting the flue through the wall, fix the center of the chimney.
Cutting a hole in the ceiling or wall, according to instructions from the chimney manufacturer. Different chimneys have slightly different installation procedures. Be sure to follow the enclosed instructions carefully. Connect the chimney brush size to the chimney with stovepipe. The stovepipe should be at least 36 inches from all combustible surfaces. Install any necessary stovepipe top of the chimney brush size. Consult the chimney installation manual for advice. Remember that outdoor walls may need to be screened in the same way as drywall.chimney brush size
This post topic: Chimney Bush