Mount a TV on the wall ideas requires something more than tools and support. It also requires thought and consideration. If you hang the TV in the wrong place, you have to move, causing unsightly holes in the wall, or watch TV in a way that is uncomfortable. The part most difficult about finding a place to mount a TV is to find where to hang it. The TV mounts should be hung on the wall studs.
If you do not do so, the TV will fall apart, it will break into pieces and completely ruin. The forms easy to find the beams of your house are using a detector beam. You’ll have to mark the location of two or three posts in the area where you want to place the TV on the wall ideas.
Inspect the furniture you have. Have a TV stand you want to place on TV on the wall ideas? This must be hung sufficiently high as to not touch the top of the table or not to be covered by it. Use a tape measure to determine the height of the table. Make a mark on the wall with a pencil to show where hit the top of the cabinet. Read more instructions place on TV on the wall.
How to Install a 50-Inch (1.25 M) TV on the Wall
Installing TV plasma 50 inch (1.25 m) from Samsung on the wall is a fairly simple task. But requires certain skills like knowing how to handle home a drill or air leveler. In addition, you need an assistant to help you lift the TV and place it in the bracket attached to the wall.
In general, it is not difficult to place a plasma TV on the wall and your efforts will be rewarded with a much more elegant decoration for your living room.
1) Find the place on the wall where you want to mount your TV. The viewing distance for a plasma TV should be approximately twice the width of the screen. The distance from the ground may be the one you want, but do not put the screen too high because it will hurt your neck. 2) Mark the place where you want to mount the plasma TV. It uses an air leveler (a device that makes the position precisely horizontal at sea level). It also measures the size of the plasma TV and marks the holes in the wall that you will have to drill to fix the stand. 3) Drill the holes and then install the support plate that comes with the mounting kit for your plasma TV. There are different mechanisms used by the assemblies. Read the manufacturer’s manual for more detailed instructions. 4) Place the TV on the stand plate. You can use an assistant to help you with the job. The plasma TV can weigh up to 80 pounds (178 kg) so doing it alone is very difficult. 5) Hide the cables with tape (the power and A / V cables).
This post topic: Home Furniture