Faux stone wall panels – Rock is a versatile and visually impressive building material, popular with designers because of the character it gives any inner or outer space. Unfortunately, using real rock or rock for remodeling and building can be impractical and expensive. That is why many remodeling uses faux rock or faux stone panels.
Determine the type of rock surface you want to use with your design project. Faux stone panels are available in a variety of styles and patterns – from natural rock wall to stacked stone and brick patterns. Measure the surface you want to cover with faux stone wall panels, and calculate how many panels you need. Depending on the pattern of artificial mountain panel you choose, count another half-panel into your calculations. Clean the surface you will cover. . Allow the surface to dry thoroughly before proceeding.
Start the installation by placing the first of your faux stone panels face down and spreading a zigzag pattern over the entire back of it, to see glue applied near the edges of each panel. Touch the faux stone wall panels against the wall you want covered. Begin at the bottom right edge of your wall and plan to install the next panel to the left of the first one. Apply glue to the back of the next panel and install it by sealing it with the panel that you have already attached and screw it into place. Use a wood to sow one of your faux stone panels in half before starting the next row. Install the left half panel just as you installed the first panel in step 5, bar the bottom edge of the panel toward the top edge of the row of panels beneath it.