Light wood bed frame – An easy way to maintain the desired look and versatility of a wooden bed frame, while also increasing its longevity, is to re-enforce a shabby, wooden bed frame with angled steel and wood uprights. Transverse planks. With a little help from the local metal store, the steel crossbars are relatively cheap and easy to build.
Ideas for fix light wood bed frame, remove the old frame infrastructure from the wooden bed. Clear any bedpost to the bed runner joints, securing a sturdy perimeter frame to the bed. Cut two angular steel struts 90 degrees long. The length of the straps is determined by the length of the bed structure. Cut the struts 2 inches shorter than the length of the mattress box spring.
Drill a series of 3 / holes 16 inches along one side of the steel struts 90 degree angle; the holes should be 3 to 4 inches apart. Along the opposite side of the 90 degree angle miter, drill four 1/4 inch holes equidistant along the underside of the strut angle. And then use of 1 screws video 1/4-inch screw the metal brackets on the bed frame with the bottom corner plates flush with the side channel bed frame. Cut four wooden crossed planks. The length of the planks will be determined by the width of the wooden bed frame.