Chain link fence post anchor – Anchoring fence posts in the ground can be done in two ways – by cementing or anchoring. Both methods require planning to ensure your posts are plumb and at the right angle to the other items. But by concreting H anchors can achieve a high degree of stability, which are necessary for the installation of fences, garden gates or the construction of a carport
H chain link fence post anchor you get at the hardware store in different sizes. Which size you need for your project depends on the dimensions of your rod. Immediately after the casting of anchors H swipe the fresh concrete by means of a trowel or a large spatula smooth. Check with the spirit level on H anchor exactly is only used. Set the record until the anchors when the concrete bed is fully cured. Work here all alone. It is advisable to fix the position to stabilize at the lower end so you can attach it easy.
Check again with the spirit level on the post is inserted correctly before you attach chain link fence post anchor. Drill this from both sides of the upper holes H in the armature. So that a through hole is formed, and then turn through a machine screw. Pierce the bottom whole position of anchors in the same way. You also propose the screw in it and provided both screws each from both sides with nuts. Used for a hexagonal wrench.