Wrought iron deck railing is a popular choice for exterior tires. Architects, builders and homeowners increasingly choose galvanized or powder-lacquered iron because the material is durable and attractive and has a wide range of traditional and modern styles. Iron is able to handle a wide range of environmental conditions and can be very rust-resistant. Preparation for DIY wrought iron deck railing, Check local building regulations to find rules for your area. Like railings and balusters made of wood, iron railings and newel posts must comply with building code requirements for the height of the rail and the maximum width between iron baluster.
Ideas for DIY wrought iron deck railing. Normally, the minimum height of rails is 42 inches. The maximum space or width between new posts is 4 inches. Develop a plan for your DIY railroad project. Decide which components to purchase to complete the job. For longer shaving runs, use shaving rails that are of the same length to keep a uniform look. You must consider this when adding the number of handrails to buy.
Installation wrought iron deck railing. The center of the iron bars, regardless of whether deck or stairs, should be placed 3 or 4 inches from the edge. Start the installation on the stairs by mounting the flat columns at the top of the landing. Secure a post to the stairs. Make sure that you follow the instructions for positioning at the right intervals. In the long run, you may be required to install a post every four feet. Most DIY iron tire railing positions are mounted in flanges. Secure columns to platform with approved screws.