Metal chimney chase cover – Cover chimney chase is a cap that seals the top of the brick or wood-framed who put chase chimneys. Chimney chase blankets usually made from low-quality steel, which will rust in the short period of time. The smallest crack or hole in the cover chase can cause costly water damage. If you are looking at a leak or rust stains on the sides of your chimney, it is time to replace the rusty cover with a stainless steel cover. Includes stainless steel will never rust, so it will be a onetime fix. The top of the chimney is nothing more than an open area that allows for smoke from the fireplace to escape from the House. Although most modern homes have coverage at the top is called a chimney cap, some elderly do not.
All chimneys should have a cover to prevent rain entry and prevent birds and squirrels get stuck. Install a metal chimney chase cover usually requires only a screwdriver and a very good balance. Place the ladder, a chimney or other parts of the House, and extend it to so who reaches or exceeds the edges of the roof line. Select the area with the perfect level of dry land. Specifies the height of the staircase, which is usually written on the label attach to it. Ungrouping the number of 4, which is how many feet out of basic household needs to rest. This is the most secure corners and the sturdiest.
Climb up the stairs, carrying the measuring tape. Measure the length and width of the opening in the top of the chimney. If it is a circular hole, measuring the width from one side to the other, which is a diameter. Go to the home improvement store and buy a cap metal chimney chase cover of the same size. Heavy work gloves, and pries the cap out of the chimney. Carefully carry it to the roof. Set the chimney cap on top of the chimney opening to ensure. Find a long screw on both sides of the chimney cap, and tighten them as much as possible with your hands. Then use a screwdriver to tighten the screws on each additional one or two trips to ensure that it is safe.